We are professionals
We integrate ideas with creativity and technology.
We provide face-to-face communication platforms to get
your message across. |
 |
Niko Measring
Miroscoe MM-40
The equipment is to observe and analyze the metallographic
structure to determine the quality from the data received.We
use three objective lens:10x,20x,100x. |
 |
Laboratorio Elettrofisic
Hystergraf I-200A/UC
The system is able to measure the fundamental magnetic
characteristics of hard magnetic materials,in conformity
with the IEC404-5 standards.Through the automatic hysteresis
tester we are able to offer curve relative to the first,second,and
third quadrants,complete hysteresis loop and reversible
permeability on all hard magnetic materials (AlNiCo,ferrite,rare
earths)in the temperature range of +19oC~+200oC.
|
| |
|
 |
Lake Shore Fluxmeter
This device works with a variety of sensing coils to measure
changing flux,and it is our fundamental QC equipment.Generally
we make sampling test for flux value to see the consistency
of the whole lot,and for each lot,the out-going testing
report shows the sampling test result of the flux value. |
 |
Nikon Profile Projector(V-12B)
Nikon Profile Projector(V-12B)
The equipment together with QC-2000(quadra-chek) is used
to inspect precisely the dimensions,especially those are
unable to be measured by common devices.Through this system,we
are able to provide you data of inner/outer radius of
segment magnet,concentricity of ring magnet,etc.The precision
can reach 0.001mm. |
|
QC